Folding boat anchors use movable arms around a central crown to provide a different storage arrangement from fixed-fluke anchors. The selected photograph shows four arms in their deployed positions. Confirm the folded dimensions, deployed span, arm movement and retaining mechanism for the exact model, including how the assembly is secured during storage and use. Do not infer compatibility, material grade, rated performance or warranty terms from the source photograph. Request the selected product drawing and applicable instructions before ordering.
| Folding Boat Anchors Configuration review
| Four folding arms around a central crown and shank Central shank with end eye and model-specific arm-retaining arrangement Folded envelope, deployed arm span and movement at the crown Storage space, handling access and the specified securing method Confirm the selected model drawing |
| Dimensions | Confirm the overall shank length Confirm the fluke or deployed arm envelope Review the stock, roll bar or folded storage span Check the attachment-eye opening and access |
| System interfaces | Match the connector to the specified eye Identify any swivel or additional connector separately Confirm the intended rode connection detail Check the vessel bow-roller geometry Review the securing and storage position Identify surrounding deck fittings and access Follow the selected product instructions |
| Visible finish | Confirm the agreed finish reference Polish does not establish material grade Agree any required appearance sample Use the specified care and maintenance guidance Do not infer coating life from the photograph |
| Construction | Confirm cast, fabricated or combined construction for the exact model |
| Drawing dimensions | Overall length: confirm against the product drawing |
| Width and clearance: Folded envelope, deployed arm span and movement at the crown | |
| Interface opening: Central shank with end eye and model-specific arm-retaining arrangementUse the final drawing revision | |
| Nominal mass: confirm the selected version | |
| Material | Specify the required metal and grade Confirm the material documents that are required |
| Identify the finish with the same product reference Specify bought-in connectors or fixings separately | |
| Review compatibility of all supplied components | |
| Intended arrangement | Provide the vessel and installation particulars Identify the boat manufacturer’s selection requirements Show the intended stowage location Include the rode and connector arrangement Provide the bow-roller and support detail Identify access for securing and handling Check deployment and storage clearances Confirm applicable limitations with the selected product For replacements, identify the existing assembly |
| Drawing | Send the configuration, dimensions and quantity together; storage space, handling access and the specified securing method. |
| Required evidence | Specify the documents needed for the exact model; a general category title does not establish certification or rated performance. |
| Order checks | Product reference and drawing revision Agreed material and finish documentation Dimensional inspection scope Surface appearance requirements Supplied-parts completeness Packaging and handling requirements Receiving and inspection record |
Folding Boat Anchors should be reviewed as part of a complete vessel arrangement. Four folding arms around a central crown and shank. The chosen photograph shows a configuration, not a universal selection rule. Record folded envelope, deployed arm span and movement at the crown and confirm storage space, handling access and the specified securing method. Keep the exact product reference with the boat installation drawing.
Provide the required dimensions, nominal mass and attachment information for the proposed version. A similar name or polished finish does not establish interchangeable parts, a material grade or an approved operating application. Ask for the documents needed for the selected model and identify any uncertainty before the order is confirmed.
The anchor, connector, rode, roller and securing arrangement need to be considered together. Follow the boat manufacturer’s requirements and the applicable product instructions. Do not substitute a component or alter a connection simply to make an unconfirmed assembly fit.
For replacement work, include photographs, measurements and any available product markings. Confirm the existing attachment and storage interfaces instead of using an approximate visual match. Keep the agreed drawing, supplied-parts list and inspection requirements together.
Review the other configurations in the Boat Anchors category, then send Hengke Casting the selected reference, quantity and installation detail. The quotation should identify the same assembly and required documentation as your enquiry.
