MADE IN DONGYING OIL SUPPLY.

MADE IN DONGYING OIL SUPPLY.
DONGYING,CHINA
SHENGLI OIL FIELD

Drill Pipes, drill collars, drill rigs.

Detailed introduction of the products

Main size for square kellys

Kelly Size		Length of Drive Section m		Length Overall m		Drive Section
		Standard LD	Optional LD	Standard L	Optional L	Across Flats DFL	Across Corners EC	Across Corners DCC	Radius RC	Radius RCC	Min. Wall ECC.Boret
		Standard LD	Optional LD	Standard L	Optional L	Across Flats DFL	Across Corners EC	Across Corners DCC	Radius RC	Radius RCC	Min. Wall ECC.Boret
63.5	(2 1/2)	11280	?	12190	?	63.5	83.3	82.55	7.9	41.3	11.43
76.2	(3)	11280	?	12190	?	76.2	100.0	98.43	9.5	49.2	11.43
88.9	(3 1/2)	11280	?	12190	?	88.9	115.1	112.70	12.7	56.4	11.43
108.0	(4 1/4)	11280	15540	12190	16460	108.0	141.3	139.70	12.7	69.9	12.07
108.0	(4 1/4)	11280	15540	12190	16460	108.0	141.3	139.70	12.7	69.9	12.07
133.4	(5 1/4)	11280	15540	12190	16460	133.4	175.4	171.45	15.9	85.7	15.88
133.4	(5 1/4)	11280	15540	12190	16460	133.4	175.4	171.45	15.9	85.7	15.88

Kelly Size		Upper Box Connection							Lower Pin Connection				Inside Diameterd
		size and style LH		OutsideDiameter		Bevel Diameter			Size and Style	Outside Diameter DLR	Length LL	Bevel Diameter DF
		Standard	Optional	Standard DU	Optional DU	LU	DF	DF	Size and Style	Outside Diameter DLR	Length LL	Bevel Diameter DF
63.5	(2 1/2)	(6 5/8)REG	(4 1/2)REG	196.9	146.1	406.4	186.1	134.5	NC26 (23/8IF)	85.7	508	82.9	31.8
76.2	(3)	(6 5/8)REG	(4 1/2)REG	196.9	146.1	406.4	186.1	134.5	NC31 (27/8IF)	104.8	508	100.4	44.5
88.9	(3 1/2)	(6 5/8)REG	(4 1/2)REG	196.9	146.1	406.4	186.1	134.5	NC38 (31/2IF)	120.7	508	116.3	57.2
108.0	(4 1/4)	(6 5/8)REG	(4 1/2)REG	196.9	146.1	406.4	186.1	134.5	NC46 (4IF)	158.8	508	145.3	71.4
108.0	(4 1/4)	(6 5/8)REG	(4 1/2)REG	196.9	146.1	406.4	186.1	134.5	NC50 (41/2IF)	161.9	508	154.0	71.4
133.4	(5 1/4)	(6 5/8)REG		196.9		406.4	186.1		5 1/2FH	177.8	508	170.7	82.6
133.4	(5 14)	(6 5/8)REG		196.9		406.4	186.1		NC56	177.8	508	171.1	82.6

hexagonal kelly

Main size for hexagonal kellys

Kelly Size		Length of Drive Section m		Length Overall m		Drive Section
		Standard LD	Optional LD	Standard L	Optional L	Across Flats DFL	Across Corners EC	Across Corners DCC	CC	Radius RCC	Min. Wall ECC. Boret
		Standard LD	Optional LD	Standard L	Optional L	Across Flats DFL	Across Corners EC	Across Corners DCC	CC	Radius RCC	Min. Wall ECC. Boret
76.2	(3)	11280		12190		76.2	85.7	85.73	6.4	42.9	12.1
88.9	(3 1/2)	11280		12190		88.9	100.8	100.00	6.4	50.0	13.3
108.0	(4 1/4)	11280	15540	12190	16460	108.0	122.2	121.44	9.9	60.7	15.9
133.4	(5 1/4)	11280	15540	12190	16460	133.4	151.6	149.86	9.5	75.0	15.9
133.4	(5 1/4)	11280	15540	12190	16460	133.4	151.6	149.86	9.5	75.0	15.9
152.4	(6)	11280	15540	12190	16460	152.4	173.0	173.02	9.5	86.5	15.9
152.4	(6)	11280	15540	12190	16460	152.4	173.0	173.02	9.5	86.5	15.9

Kelly Size		Upper Box Connection							Lower Pin Connection				Inside Diameterd
		Size and style,LH		Outside Diameter		Bevel Diameter			Size and style	Outside Diameter DLR	Length LL	Bevel Diameter DF
		Standard	Optional	Standard DC	Optional DU	Length LU	Standard DF	Optional DF	Size and style	Outside Diameter DLR	Length LL	Bevel Diameter DF
76.2	(3)	(6 5/8)REG	(4 1/2)REG	196.9	146.1	406.4	186.1	134.5	NC26(2 3/8IF)	85.7	508	82.9	31.8
88.9	(3 1/2)	(6 5/8)REG	(4 1/2)REG	196.9	146.1	406.4	186.1	134.5	NC31(2 7/8IF)	104.8	508	100.4	44.5
108.0	(4 1/4)	(6 5/8)REG	(4 1/2)REG	196.9	146.1	406.4	186.1	134.5	NC38(3 1/2IF)	120.7	508	116.3	57.2
133.4	(5 1/4)	(6 5/8)REG		196.9		406.4	186.1		NC46(4IF)	158.8	508	145.3	71.4
133.4	(5 1/4)	(6 5/8)REG		196.9		406.4	186.1		NC50(4 1/2IF)	161.9	508	154.0	71.4
152.4	(6)	(6 5/8)REG		196.9		406.4	186.1		5 1/2FH	177.8	508	170.7	82.6
152.4	(6)	(6 5/8)REG		196.9		406.4	186.1		NC56	177.8	508	171.1	82.6

Main size for square kellys

Kelly Size		Length of Drive Section m		Length Overall m		Drive Section
		Standard LD	Optional LD	Standard L	Optional L	Across Flats DFL	Across Corners EC	Across Corners DCC	Radius RC	Radius RCC	Min. Wall ECC.Boret
		Standard LD	Optional LD	Standard L	Optional L	Across Flats DFL	Across Corners EC	Across Corners DCC	Radius RC	Radius RCC	Min. Wall ECC.Boret
63.5	(2 1/2)	11280	?	12190	?	63.5	83.3	82.55	7.9	41.3	11.43
76.2	(3)	11280	?	12190	?	76.2	100.0	98.43	9.5	49.2	11.43
88.9	(3 1/2)	11280	?	12190	?	88.9	115.1	112.70	12.7	56.4	11.43
108.0	(4 1/4)	11280	15540	12190	16460	108.0	141.3	139.70	12.7	69.9	12.07
108.0	(4 1/4)	11280	15540	12190	16460	108.0	141.3	139.70	12.7	69.9	12.07
133.4	(5 1/4)	11280	15540	12190	16460	133.4	175.4	171.45	15.9	85.7	15.88
133.4	(5 1/4)	11280	15540	12190	16460	133.4	175.4	171.45	15.9	85.7	15.88

?

Kelly Size		Upper Box Connection							Lower Pin Connection				Inside Diameterd
		size and style LH		OutsideDiameter		Bevel Diameter			Size and Style	Outside Diameter DLR	Length LL	Bevel Diameter DF
		Standard	Optional	Standard DU	Optional DU	LU	DF	DF	Size and Style	Outside Diameter DLR	Length LL	Bevel Diameter DF
63.5	(2 1/2)	(6 5/8)REG	(4 1/2)REG	196.9	146.1	406.4	186.1	134.5	NC26 (23/8IF)	85.7	508	82.9	31.8
76.2	(3)	(6 5/8)REG	(4 1/2)REG	196.9	146.1	406.4	186.1	134.5	NC31 (27/8IF)	104.8	508	100.4	44.5
88.9	(3 1/2)	(6 5/8)REG	(4 1/2)REG	196.9	146.1	406.4	186.1	134.5	NC38 (31/2IF)	120.7	508	116.3	57.2
108.0	(4 1/4)	(6 5/8)REG	(4 1/2)REG	196.9	146.1	406.4	186.1	134.5	NC46 (4IF)	158.8	508	145.3	71.4
108.0	(4 1/4)	(6 5/8)REG	(4 1/2)REG	196.9	146.1	406.4	186.1	134.5	NC50 (41/2IF)	161.9	508	154.0	71.4
133.4	(5 1/4)	(6 5/8)REG	?	196.9	?	406.4	186.1	?	5 1/2FH	177.8	508	170.7	82.6
133.4	(5 14)	(6 5/8)REG	?	196.9	?	406.4	186.1	?	NC56	177.8	508	171.1	82.6

hexagonal ?kelly

Main size for hexagonal ?kellys

?

Kelly Size		Length of Drive Section m		Length Overall m		Drive Section
		Standard LD	Optional LD	Standard L	Optional L	Across Flats DFL	Across Corners EC	Across Corners DCC	CC	Radius RCC	Min. Wall ECC. Boret
		Standard LD	Optional LD	Standard L	Optional L	Across Flats DFL	Across Corners EC	Across Corners DCC	CC	Radius RCC	Min. Wall ECC. Boret
76.2	(3)	11280	?	12190	?	76.2	85.7	85.73	6.4	42.9	12.1
88.9	(3 1/2)	11280	?	12190	?	88.9	100.8	100.00	6.4	50.0	13.3
108.0	(4 1/4)	11280	15540	12190	16460	108.0	122.2	121.44	9.9	60.7	15.9
133.4	(5 1/4)	11280	15540	12190	16460	133.4	151.6	149.86	9.5	75.0	15.9
133.4	(5 1/4)	11280	15540	12190	16460	133.4	151.6	149.86	9.5	75.0	15.9
152.4	(6)	11280	15540	12190	16460	152.4	173.0	173.02	9.5	86.5	15.9
152.4	(6)	11280	15540	12190	16460	152.4	173.0	173.02	9.5	86.5	15.9

?

Kelly Size		Upper Box Connection							Lower Pin Connection				Inside Diameterd
		Size and style,LH		Outside Diameter		Bevel Diameter			Size and style	Outside Diameter DLR	Length LL	Bevel Diameter DF
		Standard	Optional	Standard DC	Optional DU	Length LU	Standard DF	Optional DF	Size and style	Outside Diameter DLR	Length LL	Bevel Diameter DF
76.2	(3)	(6 5/8)REG	(4 1/2)REG	196.9	146.1	406.4	186.1	134.5	NC26(2 3/8IF)	85.7	508	82.9	31.8
88.9	(3 1/2)	(6 5/8)REG	(4 1/2)REG	196.9	146.1	406.4	186.1	134.5	NC31(2 7/8IF)	104.8	508	100.4	44.5
108.0	(4 1/4)	(6 5/8)REG	(4 1/2)REG	196.9	146.1	406.4	186.1	134.5	NC38(3 1/2IF)	120.7	508	116.3	57.2
133.4	(5 1/4)	(6 5/8)REG	?	196.9	?	406.4	186.1	?	NC46(4IF)	158.8	508	145.3	71.4
133.4	(5 1/4)	(6 5/8)REG	?	196.9	?	406.4	186.1	?	NC50(4 1/2IF)	161.9	508	154.0	71.4
152.4	(6)	(6 5/8)REG	?	196.9	?	406.4	186.1	?	5 1/2FH	177.8	508	170.7	82.6
152.4	(6)	(6 5/8)REG	?	196.9	?	406.4	186.1	?	NC56	177.8	508	171.1	82.6

?

?

Heavy Weight Drill pipe

Integral heavy weight drill pipe

Skid-Mounted Drilling Rigs

If you need other Products, please go back to HomePage or Click the following links.

BOP Control System

Truck Mounted Rig

Drilling Machine

Drilling Machine

Drilling Machine

Drilling Machine

Drilling Machine

Drilling Machine

Copy Rights 2004-2010 ©MADE IN DONGYING Machinery & Tools Solution.
Dongying Economic and Development Zone,Dongying,Shandong 257091 China
Http://www.Made-In-Dongying.com